How to Replace a Wood Door
-
font size
decrease font size
increase font size
Video
Replacing an old wooden door is an easy afternoon DIY project, and you probably have the basic tools required. Watch our easy solution in 60 Simple Seconds.
Exterior wooden doors are subject to weather extremes and often deteriorate long before the door frame. Rather than tear out the entire door and frame, you can replace the old door by matching up the existing hinges on a new door and installing it on the existing frame. Watch this episode of 60 Simple Seconds for a quick look at how to replace a wooden door.
The cost of this project will depend on your needs and taste. Hollow core door slabs for outbuildings can cost as little as $25. If you’re replacing an entry door to your residence or if you want a more secure door, solid core door slabs are available with prices starting around $100. Insulated steel and fiberglass door slabs can also be installed in the same manner.
Necessary Tools:
Screw Driver
Chisel
Hammer
Tape Measure
Pencil
Drill
Measure existing door and trim new door slab as necessary.
Remove existing deadbolt and door hardware.
Knock out hinge pins and remove door.
Remove hinges from the old door.
Mark hinge location on new door and score with utility knife.
Working lengthwise, use a wood chisel to prepare hinge notches.
Drill pilot holes for screws and install hinges.
Hang door and replace pins.
Reinstall hardware and door handle.
Lock, unlock, open, and close your new door to check for proper operation.
- Replacing a Wood Door (1882 Downloads)
Buildipedia Staff
The Buildipedia research and writing staff consists of dozens of experienced professionals from many sectors of the industry, including architects, designers, contractors, and engineers.
Website: buildipedia.com/